Carbide Tipped Rotary Bits Perfect for drilling through light aggregate concrete-masonry, including brick, cinder block, plaster, and stucco. While often used in hammer drills, these bits are designed primarily for rotary drill motors and are not recommended for hammering through stone or slag concrete.
Thin Wall Percussion Core Bits Used to bore large diameter holes in brick, block, and masonry. They are a lighter weight, faster, cleaner cutting alternative to standard thick wall percussion cores. The "inside" core depth is 3". The T-COR Series is also compatible with smaller SDS drills, where thick wall percussion cores are specifically designed for bigger drill motors only. Each of these thin wall cores have a screw on the shank and a drop-in starter bit. Not recommended for hard slag-concrete.
Thick Wall Percussion Core Bits Used to bore large diameter holes in brick, block, masonry, and concrete. The "inside" core depth is 4". Thick Wall Cores are extremely durable and can be re-tipped. The thicker core wall results in longer life, yet slower drilling time. Thick wall core bits are made to be used with larger roto-hammer drills only. Deep holes in concrete require removal of core particles. Not to be used to drill through rebar. Each of these thick wall cores have a tapered shank and a hex shank starter bit
Hollow Core Diamond Grit Tile Drill Cuts the Toughest porcelain, Ceramic Tile, Masonry, Stone. .
Percussion Chisels Flat Cold Chisel scaling, chipping, and chiseling Scaling Chipping Chisel removing scale, rust, and weld spatter
Moil or Bull Point Chisel used for light demolition Clay Digging Chisel Digging hard clay, dirt, and grave Slotting Chisels for cutting slots between holes Ground Rod Driver for driving ground rods
SDS Bit Adapters These adapters are to use with SDS Series Hammer Bits in Spline drive and SDS-Max tools.