Sign In
Cable Tie Products
Wire Raceway & Tubing
J Hooks, Bushings & Clamps
Bushings Fittings & Grommeting
Hole Plugs
Conduit Bushings
Insulating Bushings
All-Fit Bushings
Standard Bushings "SNAP"
Reducing Bushings
Irregular Hole Bushings
Flexible Grommeting
Metal Box Connector-Strain Relief
Feed-Thru Bushings
Wire Clamps & Staples
Safety Plates
J-Hooks, Bridle Rings, Cable Hangers
Beam Clamps
Electrical Mounting Devices
Spacers, Standoffs & PCB Mounts
Hose Clamps Stainless Steel
Conduit Straps
Wire Identification Products
Adhesives, Tapes, & Sealants
Terminals & Connectors
Modular Plugs & Jacks
Anchoring Products
Drill Bits
Saws & Blades
Screws, Bolts, Nuts and Drivers
Safety & General Supplies
Tools
Magnetic Security Contacts
Home Theatre Solutions
Clearance/OverStock
Monthly Promo
site map
|
Specifications:
BUSHING - INSULATING 7/8" (1/2" KO) Insulating Bushing (1,000)
|
| |
(1/2" KO) Insulating Bushing (1,000)">
|
Quantity in Basket:
None
Code: BUSH78-M
Price: $252.03
|
| |
|
Yes, this is the size for 1/2" Conduit Knock-Outs (1000 pack)
|
NOTE: To confirm the SIZE of bushing you are looking for, on the front rim of each BUSHING there is a number that starts with MP or SB which will be followed by numbers which will confirm the size.
MP250 = (Part# BUSH14-) for 1/4" drilled hole. MP312 = (Part# BUSH516-) for 5/16" drilled hole. MP375 = (Part# BUSH38-) for 3/8" drilled hole.
MP500 = (Part# BUSH12-) for 1/2" drilled hole. MP625 = (Part# BUSH58-) for 5/8" drilled hole or to put into the end of 1/2" conduit.
MP750 = (Part# BUSH34-) for 3/4" drilled hole.
MP810 = (Part# BUSH1316-) for 13/16" drilled hole or to put into the end of 3/4" conduit.
MP871 = (Part# BUSH78-) for 7/8" hole which is (1/2" Conduit Knock Out Hole). MP100 = (Part# BUSH1-) for 1" drilled hole.
MP109 = (Part# BUSH118-) for 1-1/8" hole which is (3/4" Conduit Knock Out Hole).
MP137 = (Part# BUSH138-) for 1-3/8" hole which is (1" Conduit Knock Out Hole). MP175 = (Part# BUSH134-) for 1-3/4" hole which is (1-1/4" Conduit Knock Out Hole).
MP200 = (Part# BUSH2-) for 2" hole which is (1-1/2" Conduit Knock Out Hole).
|